The GYTR Hydraulic Clutch Kit is specially tuned to optimize disengagement zone, decrease lever load and minimize maintenance. As most hydraulic clutch setups, it self-adjusts to clutch heat and wear in most conditions to eliminate the need for manual clutch lever adjustment. The Yamaha Parts And Accessories Division have given us 2023/2024YZ450F owners an option…
I stumbled on this via Johnny and Preston Campbell but thought it was a good mod to let you all in on. The 2023 Kawasaki KX250/450 master cylinder kit works on the Honda CRF450R and it makes the clutch action as well as the pull so much better! As you know the stock Honda clutch…
SlipShot is a small hydraulic damper that controls the rate at which the clutch is allowed to engage at the start of a race. Mounted down near your engine at the clutch actuation arm or on the hydraulic master cylinder (like the one shown/tested), the unit is activated by a handlebar-mounted lever on the starting…
I will admit that I am usually a stock perch/lever or a Works Connection Elite Perch/Lever kind of rider and although I have tried many different perch/lever set ups those are the two that I normally gravitate towards or back to. I have tested a lot of combos and have come to the conclusion that…
Do you have a 2017-2020 Honda CRF450R? If so, then you know that the clutch is not the best of the bunch. The clutch gets hot too quick then proceeds to drag/slip during your moto and you’re left with throttle to rear wheel connection loss (aka loss of power/traction). Or how about that clutch lever…
By: Michael Allen
As technology and quality of parts advance it’s becoming harder and harder to find things to improve upon on a stock motorcycle. Everything from the wheels to the handlebars have gotten so much better and last so much longer than in the past. That being said there is always one thing that…
I am hard on clutches. Why? Well…Instead of letting off the throttle when the front wheel starts to loft upward, I simply just slip/drag the clutch a little to modulate the power, so I can get to point A to point B in a faster manner, without letting off of the throttle. This way of…
I originally wanted to do a Hinson versus Rekluse clutch test for the 2019 Honda CRF450R, but after going back and forth for a few weeks (testing these parts), I decided that both of these mods are such an improvement over the stock clutch system, that there shouldn't be a “winner”. Each clutch has a…
Do you have a 2019 Kawasaki KX450? If so, we are here to give you a little inside knowledge. The new 2019 KX450 is one great machine, but the doesn't mean it is perfect right? On our test bike we have experienced with some clutch drag and clutch lever movement when riding. Under heavy load (or…